Pumps for Water Market
结果33-40 of 42

GWPSelf-Priming Pump

GWPSelf-Priming Pump

The GWP is a self-priming pump model that can handle both clear liquids and suspended solids up to 3” in diameter. Its design has a chamber ...

GSD-pump

GSD General Service Pump

GSD泵线由单个阶段,水平,一般服务离心泵组合,结合了高级工程以覆盖...

Capacityup to 1,022 m³/h (4,500 gpm)
Head到122 m(400英尺)
GP-BB4型泵

GP Ring-Section Type Pump

The GP pump is a horizontal, between bearings, multi-stage, radially split, ring section type centrifugal process pump. Available in ...

Capacityup to 900 m³/hr (4000 gpm)
Head最多4,000 m(13,120英尺)
ESK泵

ESK地平线tal Single Stage Pump

Waste-water pump with non-clogging and non-stringing single-channel impeller, in a back pull out design. Installation horizontal with a ...

Capacity70 to 2,000 m³/h (308 to 8,820 U.S. gpm)
Head4 to 35 m (13 to 115 ft)
RP的DX垂直过程泵

DX垂直过程泵

RP's type DX is a heavy-duty, vertical double suction, twin volute, single stage, centrifugal design. It has good NPSH characteristics and ...

Capacity最多3,630立方米/h(16,000 gpm)
Headup to 82 m (270 ft)
DSV-Vertical-Process-Pump

DSV垂直过程泵

DSV型是一种重型,垂直的双吸力,双伏特,单阶段离心设计。DSV泵具有良好的NPSH ...

Capacity340 to 11,360 m³/h (1,500 to 50,000 gpm)
Head170至650 m(40至600英尺)
cpp-l-pump

CPP-L ANSI过程泵

The low flow option of the CPP line, the CPP-L is designed to reduce the radial load and potential shaft deflection issues at low flow or ...

Capacityup to 48 m³/h (210 gpm)
Head最多281 m(920英尺)
CPP ANSI过程泵by Ruhrpumpen

CPP ANSI过程泵

CPP旨在超过ANSI / ASME B73.1规范,是水平的,单级,末端吸力,可行的离心泵...

Capacityup to 1,150 m³/h (5,000 gpm)
Headup to 235 m (770 ft)
Page 5 of 6